Positioner (Tilt Mechanism: Motor)

EVPOS-300A Positioner

1.) Max load: 300 kgs
2.) Table rotation torque: 3.6 kg.m
3.) Table tilt operation: motor
4.) Hold/Inch welding

● 100% Made in TAIWAN

EVPOS-300ACA Positioner

1.) Max load: 300 kgs
2.) Table rotation torque: 3.6 kg.m
3.) Overlap/Timer/Inch welding
4.) Compatible with welder start signal: 2 cycle / 4 cycle
5.) Table tilt operation: motor

● 100% Made in TAIWAN

EVPOS-500A Positioner

1.) Max load: 500 kgs
2.) Table rotation torque: 30.0 kg.m
3.) Table tilt operation: motor
4.) Hold/Inch welding

● 100% Made in TAIWAN

EVPOS-500ACA Positioner

1.) Max load: 500 kgs
2.) Table rotation torque: 30.0 kg.m
3.) Overlap/Timer/Inch welding
4.) Compatible with welder start signal: 2 cycle / 4 cycle
5.) Table tilt operation: motor

● 100% Made in TAIWAN

EVPOS-750A Positioner

1.) Max load: 750 kgs
2.) Table rotation torque: 52.5 kg.m
3.) Table tilt operation: motor
4.) Hold/Inch welding

● 100% Made in TAIWAN

EVPOS-750ACA Positioner

1.) Max load: 750 kgs
2.) Table rotation torque: 52.5 kg.m
3.) Overlap/Timer/Inch welding
4.) Compatible with welder start signal: 2 cycle / 4 cycle
5.) Table tilt operation: motor

● 100% Made in TAIWAN

EVPOS-1TA Positioner

1.) Max load: 1,000 kgs
2.) Table rotation torque: 300 kg.m
3.) Table tilt operation: motor
4.) Hold/Inch welding

● 100% Made in TAIWAN

EVPOS-1TACA Positioner

1.) Max load: 1,000 kgs
2.) Table rotation torque: 300 kg.m
3.) Overlap/Timer/Inch welding
4.) Compatible with welder start signal: 2 cycle / 4 cycle
5.) Table tilt operation: motor

● 100% Made in TAIWAN

EVPOS-2TA Positioner

1.) Max load: 2,000 kgs
2.) Table rotation torque: 600 kg.m
3.) Table tilt operation: motor
4.) Hold/Inch welding

● 100% Made in TAIWAN

EVPOS-2TACA Positioner

1.) Max load: 2,000 kgs
2.) Table rotation torque: 600 kg.m
3.) Overlap/Timer/Inch welding
4.) Compatible with welder start signal: 2 cycle / 4 cycle
5.) Table tilt operation: motor

● 100% Made in TAIWAN

EVPOS-3TA Positioner

1.) Max load: 3,000 kgs
2.) Table rotation torque: 900 kg.m
3.) Table tilt operation: motor
4.) Hold/Inch welding

● 100% Made in TAIWAN

EVPOS-3TACA Positioner

1.) Max load: 3,000 kgs
2.) Table rotation torque: 900 kg.m
3.) Overlap/Timer/Inch welding
4.) Compatible with welder start signal: 2 cycle / 4 cycle
5.) Table tilt operation: motor

● 100% Made in TAIWAN

EVPOS-5TA Positioner

1.) Max load: 5,000 kgs
2.) Table rotation torque: 1,500 kg.m
3.) Table tilt operation: motor
4.) Hold/Inch welding

● 100% Made in TAIWAN

EVPOS-5TACA Positioner

1.) Max Load: 5,000 kgs
2.) Table rotation torque: 1,500 kg.m
3.) Overlap/Timer/Inch welding
4.) Compatible with welder start signal: 2 cycle / 4 cycle
5.) Table tilt operation: motor

● 100% Made in TAIWAN

EVPOS-10TA Positioner

1.) Max load: 10,000 kgs
2.) Table rotation torque: 3,000 kg.m
3.) Table tilt operation: motor
4.) Hold/Inch welding

● 100% Made in TAIWAN

HFP2T-L360H35 Horizontal Frame Positioner

● 100% Made in TAIWAN

HVP-2T-ID6 Lift Positioner

1.) Max Load: 2,000 kgs
2.) Table rotatory torsion: 300 kg.m 
3.) Table tilting moment: 1,000 kg.m
4.) Table lifting stroke: 1,000 mm
5.) Table tilt angle: 0º ~ 360º
6.) Table hole diameter: 600 mm

● 100% Made in TAIWAN

YHP-750 Hydraulic Positioner

1.) Max Load: 750 kgs
2.) Table rotatory torsion: 52.5 kg.m
3.) Table tilting moment: 150 kg.m
4.) Table lifting height: 710 ~ 1,350 mm
5.) Table lifting hydraulic operation
6.) Table tilt angle: 0º ~ 120º
7.) Table tilt hydraulic operation

● 100% Made in TAIWAN

HAPOS-1TA Positioner

1.) Max Load: 1,000 kgs
2.) Table rotatory torsion: 150 kg.m
3.) Table tilt operation: motor
4.) The height of the center of the table can be adjusted to three different heights
5.) Inch / Hold start table rotating

● 100% Made in TAIWAN

HAPOS-1.5TA Positioner

1.) Max Load: 1,500 kgs
2.) Table rotatory torsion: 225 kg.m
3.) Table tilt operation: motor
4.) The height of the center of the table can be adjusted to three different heights
5.) Inch / Hold start table rotating

● 100% Made in TAIWAN

HAPOS-2TA Positioner

1.) Max Load: 2,000 kgs
2.) Table rotatory torsion: 600 kg.m
3.) Table tilt operation: motor
4.) The height of the center of the table can be adjusted to three different heights
5.) Inch / Hold start table rotating

● 100% Made in TAIWAN