
|
1.) Max load: 160Kgs 2.) Workpiece Max Diameter: 340mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 58mm 4.) Overlap/Timer/Inch welding 5.) For 2-cycle/4-cycle welding machine 6.) Cylinder-driven welding torch positioning 7.) Each module has various specs to choose from. 8.) Recommended welding tilt angle: 0 ~ 45 degrees
●100% Made in TAIWAN
|
 |
1.) Max load: 160Kgs 2.) Workpiece Max Diameter: 340mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 58mm 4.) Overlap/Timer/Inch welding 5.) For 2-cycle/4-cycle welding machine 6.) Cylinder-driven welding torch positioning 7.) Each module has various specs to choose from. 8.) Recommended welding tilt angle: 0 ~ 45 degrees 9.) Can save up to 99 sets of welding parameters. 10.) Use PLC controller and HMI screen
●100% Made in TAIWAN
|
|
1.) Max load: 400Kgs 2.) Workpiece Max Diameter: 400mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 120mm 4.) Overlap/Timer/Inch welding 5.) For 2-cycle/4-cycle welding machine 6.) Cylinder-driven welding torch positioning 7.) Each module has various specs to choose from. 8.) Recommended welding tilt angle: 0 ~ 45 degrees
●100% Made in TAIWAN
|
 |
1.) Max load: 400Kgs 2.) Workpiece Max Diameter: 400mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 120mm 4.) Overlap/Timer/Inch welding 5.) For 2-cycle/4-cycle welding machine 6.) Cylinder-driven welding torch positioning 7.) Each module has various specs to choose from. 8.) Recommended welding tilt angle: 0 ~ 45 degrees 9.) Can save up to 99 sets of welding parameters. 10.) Use PLC controller and HMI screen
●100% Made in TAIWAN
|
 |
1.) Max load: 160Kgs 2.) Workpiece Max Diameter: 340mm 3.) Have spindle thru hole, diameter: 58mm 4.) Clamp center stroke: 100mm 5.) Overlap/Timer/Inch welding 6.) For 2-cycle/4-cycle welding machine 7.) Cylinder-driven welding torch positioning 8.) Each module has various specs to choose from. 9.) Recommended welding tilt angle: 0 ~ 45 degrees
●100% Made in TAIWAN
|
 |
1.) Max load: 160Kgs 2.) Workpiece Max Diameter: 340mm 3.) Have spindle thru hole, diameter: 58mm 4.) Clamp center stroke: 100mm 5.) Overlap/Timer/Inch welding 6.) For 2-cycle/4-cycle welding machine 7.) Cylinder-driven welding torch positioning 8.) Each module has various specs to choose from. 9.) Recommended welding tilt angle: 0 ~ 45 degrees 10.) Can save up to 99 sets of welding parameters. 11.) Use PLC controller and HMI screen
●100% Made in TAIWAN
|
|
1.) Max load: 160Kgs 2.) Workpiece Max Diameter: 340mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 58mm 4.) Overlap/Timer/Inch welding 5.) For 2-cycle/4-cycle welding machine 6.) Cylinder-driven welding torch positioning 7.) Each module has various specs to choose from. 8.) Recommended welding tilt angle: 90 degrees
●100% Made in TAIWAN
|
|
1.) Max load: 160Kgs 2.) Workpiece Max Diameter: 340mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 58mm 4.) Overlap/Timer/Inch welding 5.) For 2-cycle/4-cycle welding machine 6.) Cylinder-driven welding torch positioning 7.) Each module has various specs to choose from. 8.) Recommended welding tilt angle: 90 degrees 9.) Can save up to 99 sets of welding parameters. 10.) Use PLC controller and HMI screen
●100% Made in TAIWAN
|
 |
1.) Max load: 400Kgs 2.) Workpiece Max Diameter: 400mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 120mm 4.) Overlap/Timer/Inch welding 5.) For 2-cycle/4-cycle welding machine 6.) Cylinder-driven welding torch positioning 7.) Each module has various specs to choose from. 8.) Recommended welding tilt angle: 90 degrees
●100% Made in TAIWAN
|
 |
1.) Max load: 400Kgs 2.) Workpiece Max Diameter: 400mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 120mm 4.) Overlap/Timer/Inch welding 5.) For 2-cycle/4-cycle welding machine 6.) Cylinder-driven welding torch positioning 7.) Each module has various specs to choose from. 8.) Recommended welding tilt angle: 90 degrees 9.) Can save up to 99 sets of welding parameters. 10.) Use PLC controller and HMI screen
●100% Made in TAIWAN
|
 |
1.) Max load: 160Kgs 2.) Workpiece Max Diameter: 340mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 58mm 4.) Tail stock clamp stroke: 100mm 5.) Overlap/Timer/Inch welding 6.) For 2-cycle/4-cycle welding machine 7.) Cylinder-driven welding torch positioning 8.) Each module has various specs to choose from. 9.) Recommended welding tilt angle: 90 degrees
●100% Made in TAIWAN
|
 |
1.) Max load: 160Kgs 2.) Workpiece Max Diameter: 340mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 58mm 4.) Tail stock clamp stroke: 100mm 5.) Overlap/Timer/Inch welding 6.) For 2-cycle/4-cycle welding machine 7.) Cylinder-driven welding torch positioning 8.) Each module has various specs to choose from. 9.) Recommended welding tilt angle: 90 degrees 10.) Can save up to 99 sets of welding parameters. 11.) Use PLC controller and HMI screen
●100% Made in TAIWAN
|
|
1.) Max load: 400Kgs 2.) Workpiece Max Diameter: 400mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 120mm 4.) Tail stock clamp stroke: 100mm 5.) Overlap/Timer/Inch welding 6.) For 2-cycle/4-cycle welding machine 7.) Cylinder-driven welding torch positioning 8.) Each module has various specs to choose from. 9.) Recommended welding tilt angle: 90 degrees
●100% Made in TAIWAN
|
 |
1.) Max load: 400Kgs 2.) Workpiece Max Diameter: 400mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 120mm 4.) Tail stock clamp stroke: 100mm 5.) Overlap/Timer/Inch welding 6.) For 2-cycle/4-cycle welding machine 7.) Cylinder-driven welding torch positioning 8.) Each module has various specs to choose from. 9.) Recommended welding tilt angle: 90 degrees 10.) Can save up to 99 sets of welding parameters. 11.) Use PLC controller and HMI screen
●100% Made in TAIWAN
|
 |
DP1CC28-LR60 Assembled Turn Table
1.) Max load: 160Kgs 2.) Workpiece Max Diameter: 340mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 58mm 4.) Tail stock clamp stroke: 100mm 5.) Overlap/Timer/Inch welding 6.) For 2-cycle/4-cycle welding machine 7.) Cylinder-driven welding torch positioning 8.) Each module has various specs to choose from. 9.) Recommended welding tilt angle: 90 degrees
●100% Made in TAIWAN
|
 |
DP1CP12-LR60 Assembled Turn Table
1.) Max load: 160Kgs 2.) Workpiece Max Diameter: 340mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 58mm 4.) Tail stock clamp stroke: 100mm 5.) Overlap/Timer/Inch welding 6.) For 2-cycle/4-cycle welding machine 7.) Cylinder-driven welding torch positioning 8.) Each module has various specs to choose from. 9.) Recommended welding tilt angle: 90 degrees 10.) Can save up to 99 sets of welding parameters. 11.) Use PLC controller and HMI screen
●100% Made in TAIWAN
|
|
DP3DC28-LR60 Assembled Turn Table
1.) Max load: 400Kgs 2.) Workpiece Max Diameter: 400mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 120mm 4.) Tail stock clamp stroke: 100mm 5.) Overlap/Timer/Inch welding 6.) For 2-cycle/4-cycle welding machine 7.) Cylinder-driven welding torch positioning 8.) Each module has various specs to choose from. 9.) Recommended welding tilt angle: 90 degrees
●100% Made in TAIWAN
|
|
DP3DP12-LR60 Assembled Turn Table
1.) Max load: 400Kgs 2.) Workpiece Max Diameter: 400mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 120mm 4.) Tail stock clamp stroke: 100mm 5.) Overlap/Timer/Inch welding 6.) For 2-cycle/4-cycle welding machine 7.) Cylinder-driven welding torch positioning 8.) Each module has various specs to choose from. 9.) Recommended welding tilt angle: 90 degrees 10.) Can save up to 99 sets of welding parameters. 11.) Use PLC controller and HMI screen
●100% Made in TAIWAN
|
 |
DP1CC38-ST30 Assembled Turn Table
1.) Max load: 160Kgs 2.) Workpiece Max Diameter: 340mm (When table is vertical with ground.) 3.) Have spindle thru hole, diameter: 58mm 4.) Support Spot Welding (1-12 points) 5.) For 2-cycle welding machine only 6.) Cylinder-driven welding torch positioning 7.) Each module has various specs to choose from. 8.) Recommended welding tilt angle: 0 ~ 45 degrees
●100% Made in TAIWAN
|
 |
DP4BC38-VSTH20 Assembled Turn Table
1.) Max Load: 160Kgs 2.) Workpiece Max Diameter: 340mm 3.) Have spindle thru hole, diameter: 58mm 4.) Clamp center stroke: 100mm 5.) Support Spot Welding (1-12 points) 6.) For 2-cycle welding machine only 7.) Cylinder-driven welding torch positioning 8.) Each module has various specs to choose from. 9.) Recommended welding tilt angle: 0 ~ 45 degrees
●100% Made in TAIWAN
|