Accessory for Auto Welding

TW-4RA Cold Wire Feeder

1.) Wire feeder is four-wheel drive.
2.) Compatible with welder start signal: 2 cycle / 4 cycle
3.) Wire diameter: 0.8 mm ~ 1.6 mm
4.) It can be used with any brand of TIG and Plasma welder.
5.) The feeder can operate continuous wire feeding and intermittent wire feeding, and has the function of ending and returning to prevent the welding wire from sticking to the workpiece when the welding is completed.

● 100% Made in TAIWAN

TW-4RH Manual Cold Wire Feeder

1.) The feeder cooperated with a handheld TIG welding torch to operate one-handed TIG filler welding, which can improve the efficiency of manual TIG welding filler welding.
2.) Wire feeder is four-wheel drive.
3.) Compatible with welder start signal: 2 cycle / 4 cycle
4.) Wire diameter: 0.8 mm ~ 1.6 mm
5.) The feeder can operate continuous wire feeding and intermittent wire feeding, and has the function of ending and returning to prevent the welding wire from sticking to the workpiece when the welding is completed.

● 100% Made in TAIWAN

AVC-101 Arc Length Controller

1.) It can automatically detect and adjust the arc height.
2.) Arc voltage can be set directly.
3.) It can be used with any brand of TIG and Plasma welder.

● 100% Made in TAIWAN

LW-1A Linear Oscillator

1.) Max load: 5 kgs
2.) This machine uses a stepping motor.
3.) The machine can be set to move the distance and pause time.
4.) Can hold MIG, MAG, TIG, Plasma welding torch.

● 100% Made in TAIWAN

LW-2A Linear Oscillator

1.) Max load: 20 kgs
2.) This machine uses a stepping motor.
3.) This machine can be set to move the distance and pause time.
4.) Can hold MIG, MAG, TIG, Plasma welding torch.

● 100% Made in TAIWAN

LW-3A Linear Oscillator

1.) Max load: 50 kgs
2.) This machine uses a stepping motor.
3.) This machine can be set to move the distance and pause time.
4.) Can hold MIG, MAG, TIG, SAW and Plasma welding torch.

● 100% Made in TAIWAN

WCD-01 Welding Pool Monitoring System

1.) Special design for filming welding pool.
2.) Applicable Welding Method: MMA / MAG / MIG / TIG / PAW
3.) Focusable Distance: 160 mm ~ 250 mm
4.) Imaging Type: B&W
5.) Screen Cable Length: 10 M
6.) Monitor Spec.: 15" LCD

WCD-02 Welding Position Monitoring System

1.) Special design for filming welding position.
2.) Applicable Welding Method: MAG / MIG / TIG / SAW
3.) Focal Length: 5 mm ~ 50 mm (Replaceable)
4.) Min. Focusable Distance: 250 mm
5.) Imaging Type: Color / B&W
6.) Screen Cable Length: 10 M
7.) Monitor Spec.: 15" LCD

IRGP-30 Gas Protection Cart

1.) Designed for gas shielding on the back of the round-welding of cylinder workpiece.
2.) Workpiece diameter: 1,200 ~ 3,000 mm
3.) Easy assemble/ disassemble without any tool.
4.) Min. entry hole diameter: 500 mm
5.) Horizonal balance method: gravity hammer

● 100% Made in TAIWAN