- Home
- Turn Table Series
- For Manual Welding
Turn Table (For Manual Welding)

|
1.) Max load: 80Kgs 2.) Pedal switch 3.) Timer/Inch welding 4.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|

|
1.) Max load: 80Kgs 2.) Pedal switch 3.) Hold/Inch welding 4.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|

|
1.) Max load: 80Kgs 2.) Have spindle thru hole, diameter: 20mm 3.) Two speed ranges 4.) Pedal switch 5.) Timer/Inch welding 6.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|

|
1.) Max load: 80Kgs 2.) Have spindle thru hole, diameter: 20mm 3.) Two speed ranges 4.) Pedal switch 5.) Hold/Inch welding 6.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|

|
1.) Max load: 160Kgs 2.) Have spindle thru hole, diameter: 58mm 3.) Pedal switch 4.) Timer/Inch welding 5.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|
 |
1.) Max load: 160Kgs 2.) Have spindle thru hole, diameter: 58mm 3.) Pedal switch 4.) Hold/Inch welding 5.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|

|
1.) Max load: 160Kgs 2.) Have spindle thru hole, diameter: 58mm 3.) Speed adj. pedal switch 4.) Hold/Inch welding 5.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|

|
1.) Max load: 290Kgs 2.) Have spindle thru hole, diameter: 58mm 3.) Pedal switch 4.) Timer/Inch welding 5.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|
 |
1.) Max load: 290Kgs 2.) Have spindle thru hole, diameter: 58mm 3.) Pedal switch 4.) Hold/Inch welding 5.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|

|
1.) Max load: 290Kgs 2.) Have spindle thru hole, diameter: 58mm 3.) Speed adj. pedal switch 4.) Hold/Inch welding 5.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|

|
1.) Max load: 400Kgs 2.) Have spindle thru hole, diameter: 120mm 3.) Pedal switch 4.) Timer/Inch welding 5.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|
 |
1.) Max load: 400Kgs 2.) Have spindle thru hole, diameter: 120mm 3.) Pedal switch 4.) Hold/Inch welding 5.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|

|
1.) Max load: 400Kgs 2.) Have spindle thru hole, diameter: 120mm 3.) Speed adj. pedal switch 4.) Hold/Inch welding 5.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|

|
1.) Max load: 160Kgs 2.) Workpiece Max Diameter : 400mm 3.) Have spindle thru hole, diameter: 58mm 4.) Clamp center stroke: 100mm 5.) Pedal switch 6.) Timer/Inch welding 7.) Grip workpiece after the tilt angle of table is locked.
●100% Made in TAIWAN
|