Accessory for Auto Welding

TW-4RA Cold Wire Feeder

1.) Wire feeder is four-wheel drive

2.) Connect the welder 2cycle / 4cycle start

3.) Wire Dia : 0.8-1.6mm

4.) It can be used with any brand of TIG and Plasma welder

●100% Made in TAIWAN

AVC-101 Arc Length Controller

1.) It can automatically detect the arc height

2.) Arc voltage can be set directly

3.) It can be used with any brand of TIG and Plasma welder

●100% Made in TAIWAN

LW-1A Linear Oscillator

1.) Max Load : 5Kgs

2.) This machine uses a stepping motor

3.) The machine can be set to move the distance and dead time

4.) Can holding the MIG/MAG,TIG,Plasma welding torch

●100% Made in TAIWAN

LW-2A Linear Oscillator

1.) Max Load : 20Kgs

2.) This machine uses a stepping motor

3.) The machine can be set to move the distance and dead time

4.) Can holding the MIG/MAG,TIG,Plasma welding torch

●100% Made in TAIWAN

LW-3A Linear Oscillator

1.) Max Load : 50Kgs

2.) This machine uses a stepping motor

3.) The machine can be set to move the distance and dead time

3.) Can holding the MIG/MAG,TIG,Plasma welding torch and SAW

●100% Made in TAIWAN

WB-3800D Water Coller  

1.) Uses stainless steel pump

2.) All pipes are copper fittings

3.) The water tank is stainless steel material once to take shape

4.) Transparent acrylic glass, ready to confirm the status of the cooling water circulation

●100% Made in TAIWAN

TW-4RM Manual Cold Wire Feeder

1.) The feeder cooperated with a handheld TIG welding torch to operate one-handed TIG filler welding,
     which can improve the efficiency of manual TIG welding filler welding

2.) Wire feeder is four-wheel drive

3.) Operation welding start method : Standard(2 cycle) / Crater(4cycle)

4.) Wire Dia : 0.8-1.6mm

5.) The feeder can operate continuous wire feeding and intermittent wire feeding,
     and has the function of ending and returning to prevent the welding wire from sticking to the workpiece when the welding is completed

WCD-01 Welding Camera System

1.) Photography distance : 200mm. - 700mm

2.) Focus adjustment : 5mm. - 50mm

3.) Camera cable length 30m

4.) Fill light : Red light LED

5.) Screen 10"

GM-CA01 CO2/Ar Gas mixer  

1.) It can mix CO2 and Ar, suitable for MIG welding operations

2.) The gas flow can be adjusted individually and the balance pressure can be set inside

3.) The mixing ratio can be adjusted according to the needs of the weld

4.) Ensure that the gas is evenly mixed during welding and does not produce specific gravity separation