RSP-300A-NC Servo Positioner (No controller)

1.)Max Load : 300Kgs.

2.)Table Rotate Reduction ratio : 1 / 60.

3.)Table Diameter : 500mm.

4.)Spindle thru hole : 45mm.

5.)Table tilt angle : 0 - 90 Degree.

6.)Table Tilt Reduction ratio : 1 / 1200.

7.)Can be installed with the servo motor (400W) of each brand robot.

8.)The machine does not contain the controller and needs to be controlled by the robot.

9.)When table tilt,W(kgs) * H/2(cm.) = 3,300(kgs.cm)

10.)When table and ground are vertical,W(kgs) * L/2(cm.) = 5,100(kgs.cm)