IRGP-30 Gas protection device


 Catalogue              Instruction               Youtube

1.)The device is used for gas shielding on the back of the cylindrical weld bead.

2.)Work piece Dia : 1,200 - 3,000mm

3.)The device can be disassembled directly, and enter the workpiece cylinder through holes with an inner diameter of 500mm respectively.

4.)The device uses a gravity hammer to maintain balance, and the gas cover can maintain a horizontal position.

5.)The controller can be directly activated or remote signal activated.

6.)Hose length : 10m


  • Total visitors 207301